As a furnace owner, it’s your responsibility to take good care of the furnace. Here are some of the things given by furnace service professionals on how to keep your furnace in good shape:

Keep the thermostat settings low

Did you know that you can save up to 10% of your heating costs by turning the thermostat settings low by 7-10 degrees? For you to have an easy time doing it, you should invest in a programmable thermostat.

The thermostat makes it easy for you to control the temperature and set the temperature of your desire. When you are going on vacation, you only need to set the thermostat a few degrees lower than you normally do and it will continue functioning without you worrying about the pipes freezing.

Even when you are staying in the house, turning the temperature down at night will help you in saving a lot of money in the long run.

There are plenty of programmable thermostats in the market that you can go for. when making the purchase, go for a high-quality one that will not only last for a long time, but also give you a great service.

You should note that buying a good quality thermostat isn’t enough—you need to ensure that it’s properly calibrated. It’s common for the unit to lose it’s calibration when it accumulates a lot of dirt or you accidentally hit.

It’s easy to calibrate the unit if you have the skills but if you have never done it before, you should hire a contractor to help you out.

Invest in a high-quality furnace

How old is your furnace? If it’s more than 10 years and constantly developing problems, you should highly think about replacing it. A tell-tale sign of a unit that needs replacement is if you have the number of a furnace repair professional in your speed dial.

If this is the case, it means that you are always on the phone with the contractor which might not only be costing you a lot of money to call, it also must be costing you to keep on hiring him/her to repair the unit.

When you are buying the new appliance, you should go for a high-quality unit with a high energy rating. The last thing you want is a unit that will end up costing you a lot of money to keep it running.

You also should pay close attention to the size of the unit. Plenty of people buy large appliances with the hope that they will give them great results. While the appliance will heat the house fast, it will cost you a lot of money to keep it running as it will be consuming a lot of energy.

Just as you should avoid a furnace that is too large, you also should avoid one that is too small. This is because it won’t give you the service that you need. The unit might also keep on failing as you will be overworking it by forcing it to heat an extremely small room.

Regularly inspect and clean the furnace burners

The furnace burners have a great impact on the efficiency of the furnace. At least once a year, inspect the burners and ensure that they are in good shape. Be on the lookout for rust or corrosion. If it’s there, try to get rid of it, but if you are unable to do it, you will have to replace the unit.

Work at improving the indoor air quality

Due to their location and use, HVAC systems tend to accumulate a lot of dirt. When you don’t get rid of the dirt or debris early enough, you tend to greatly reduce the efficiency of the heating unit.

For your furnace to be effective in its working, you need to ensure that the indoor air quality is high enough. You can do this in many ways. One of the ways is by changing the air filter. At least once a month, check the condition of your filter. If it’s too dirty, you have no way out, other than to replace it.

In addition to the air filters, heating service repair Falls Church professionals recommend that you also pay attention to the furnace coils, baseboard heaters, radiators, and registers. If dirty or damaged, fix them.